Product Description
Ramming pile solar mounting system: 1.Pile and foundation are integrated into a complete structure. The galvanized pillars are also the part of foundation.The steel pile has strong rigidity, and the structure is stable and anti-shaking. 2.Lesser aluminum parts,fast installation, improving construction efficiency (no base required, no installation processes of aluminum post to the base) and save time. 3.Can be flexibly adapted to on-site conditions. The project site is not completely flat, but has slopes and bumps. The ramming pile is integrated with the foundation to overcome the unevenness of the land,to eliminate problems such as insufficient length of screw piles. 4.It is suitable for mountainous areas, forested areas and especially terrain with complex slopes. There is no large-scale earth moving and backfill, and the costs of land clearing are reduced.
Ramming pile solar mounting system parameters
Installation base	Ground category 1,2 or 3
Tilt angle	As design,or 10,15,20,26
Wind load	10m/s~60m/s
Snow load	0.5~1.4kn/M²
ground height	500mm/600mm /1000mm ,or as design
Applicable module type	Mono-crystalline, Poly
Module Orientation	Horizontal / Vertical
Design standard	JIS C 8955-2017,AS/NZS1170
Material	Carbon steel with HDG
Bolt& Screw	Stainless steel SUS304
Warranty&Lifetime	12 years&More than 30 years

Xiamen Shang Guang Solar Technology Co.,Ltd

Xiamen Shang Guang Solar Technology Co., Ltd  located in Xiamen,China,which is a new energy hightech enterprise specializes in research and development , producton , sales and service of photovoltaic products , and is committed to providing customers with stable,reliable , cost-effective and efficient whole photovoltaic system solutions.

Since the establishment of company , it's photovoltaic products:solar modules, solar mounting brackets,inverters, pv cables,grid cabinets, combiner boxes, street lights, etc have been successfully sold to Japan, Europe ,india . Korea , Southeast Asia ,USA etc more than 30 countries and regions.We have multiple offices in globally.



We have obtained multiple international certifications such as ISO, SGS, JIS, CE, AAA, and over one hundred corporate honors, making us one of the few outstanding photovoltaic enterprises.

Our factory is the top company in aluminum industry with about 900 thousand m2 production base, 45 aluminum extrusion production lines internationally advanced assembly and an annual production capacity of solar mounting system as 90mw/month. We control the quality by ISO9001 quality control system. Have a national level laboratory and do all strength tests before shipping . Our products have strictly certified according to GB/T 5237, Japan (JIS), America (AA) and other countries' standards, and enjoy good reputation from all over the world.




Stress analysis capability
Design accordance with international standards strictly and provide customers professional photovoltaicsolutions.From the simulation result,  you can see the strength of the structure, whether it is sufficient or not enough, or is over strong.As far as I know, there are few companies in our area which can make strength verification like this.Even if the strength is sufficient, the strength can also be adjusted through confirmation of the stress verification ratio to change parts specification to reduce costs. Generally, the stress calculation is calculated by the professional engineer in building company, however, our structural calculation was calculated by our own engineer.
It proved that SG solar is different from other companies. If the usage of stress verification on strength in a best way, it can meet the strength and the low price at the same time.Through structural analysis, we ensured strength while also achieving cost control,so under the same design conditions, our prices will be definitely cheaper than others by repeatedly verification.
 

Our rich product line, professional R&D and design team, well-educated production, management, and sales team, and strict design in accordance with international norms and standards have earned us the favor and praise from numerous customers. The company has always adhered to the policy of "independent innovation, customer priority" and made significant contributions to promoting the development of renewable energy and carbon-emission reduction in society.

Q 1:Does your company mainly produce brackets?

A: Xiamen Shang Guang Solar Technology Co, Ltd is a new energy hightech enterprise specializes in research and development, producton, sales and service of photovoltaic products, and it is committed to providing customers with stable, reliable, cost-effective and effcient whole photovoltaic system solutions. Our product has solar modules, solar mounting brackets, inverters, pv cables, grid-cabinets, combiner boxes, street lights.

Q 2:Is the quotation charged?  What information do I need to provide to obtain the price?

The quotation is free. Please contact us to obtain the price. The following design conditions should be needed when we design a solution and confirm the prices:
A. Panel Length, width and thickness
B. Tilt angle
C.Arry: How many solar panels in total?
D. Max wind speed 
E. Max snow load 
F. Ground clearance: the height from the ground
G. Foundation: ground screw pile foundation or concrete foundation 
H. The delivery address is factory, port, or on-site?

Q3 :Can I have a sample order ?Is the sample free or charged?
A: Yes,sample order is welcomed for test and check quality at first.
Mixed samples are acceptable at the same.Our small samples are provided free of charge.

Q4 :Why Choose SG Solar?

A. With over 10 years of experience in the production and design of solar photovoltaic installation brackets systems, we provide     materials for worldwide EPC contractors of photovoltaic power plants. 
B. Due to market demand, our professional R&D department always improving and designing new solar installation systems based on the different needs of different projects, truly achieving OEM service.
C. Stable product quality, good delivery, supply, and received good reputation
D. Delivery time: 7-14 days.
E. We have our own extrusion plant and parts machining plant. So, we can offer you the most competitive price.

Q5 :How many days do you usually need to make a quotation?

A:Generally, we reply to the customer within 2 hours and provide drawings and prices within 24 hours

Q6: Can you provide a strength calculation sheet?

A: We can provide calculations for Japanese JIS standards, American standards, and European standards. There are templates available. If you need these, you can contact us

Q7:Are there any quality issues with your products?

A: Our products strictly follow the ISO quality system to fundamentally solve problems and ensure that high-quality products delivered to customers.We provide free spare parts for each case, and the quantity is sufficient.