Basic Info.
Types
Vsp Ring
Processing Service
Moulding
Performance
High Voidage, Low Pressure
Transport Package
Plastic Woven Bag
Specification
25, 32, 50, 90, 95mm
Origin
Jiangsu, China
HS Code
39269090
Production Capacity
8000 M3 /Year
Product Description
Plastic Tri pack ball for Tower Packing Mass Transfer Column Packing tri pack balls
Plastic Tri Pack ball was designed by Jager Tri. Generally speaking, no big surface area is Tri-pack's biggest advantage. The distinctive shaping of ribs, struts and drip rods Tri-packs tower packing media superior wetting characteristics, and the ability to maintain uniform liquid distribution throughout the bed.
In the traditional theory of mass transfer, we often think big surface area will increase the mass transfer efficiency. Sometimes, excess surface area can impede gas/liquid contact and create higher pressure drops. Finally, it will lead to Packing's channel blocking. Based on this new understanding, Jaeger invented Tri-pack. Basically the packing provides maximum surface contact between the gas & the scrubbing liquid by facilitation through continuous formation of droplet by the packed bed. It was recognized best packing in air stripping, de-gasifier and scrubber.
Basic Info
--------------------------------------------------------------------------
Technical Data:
| Item Name | Plastic Tri Pack ball | ||||
| Life Span | >3 years | ||||
| Size | Surface area ft2/ft3 | Void Volume % | Packing Number pieces/m3 | Packing Density Kg/m3 | Dry Packing Factor m-1 |
| Φ25 | 85 | 90 | 81200 | 81 | 28 |
| Φ32 | 70 | 92 | 25000 | 70 | 25 |
| Φ50 | 48 | 93 | 11500 | 62 | 16 |
| Φ95 | 38 | 95 | 1800 | 45 | 12 |
| Feature | 1. Tri-packs are hollow,spherical packings made of injection molde plastic,available in four diameters: 25,32,50,95mm 2.Symmetrical geometry made from a unique network ofribs,struts and drip rods. 3.High activ surface areas. 4.Extremely low pressure drops. 5.Extremely high operating capacities | ||||
| Advantage | 1. high and mass heat transfer rates 2. Excellent gas and liquid dispersion characteristics 3. Resist nesting,making removal easily 4. Available in a wide variety of plastic raw material 5.Predictable performace | ||||
| Application | 1. Stripping,de-gasifier and scrubber 2. Liquid extraction 3.Gas&Liquid Seperation 4. Water treatment | ||||
Physical&Chemical properties
Plastic Tri Pack ball can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene(PE),polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC),polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE).
The temperature in media ranges from 60 Degree C to 280 DegreeC.
Our Factory assure all tower packing made from 100% Virgin Material.
| Performace/Material | PE | PP | RPP | PVC | CPVC | PVDF |
| Density(g/cm3) (after injection molding) | 0.98 | 0.96 | 1.2 | 1.7 | 1.8 | 1.8 |
| Operation temp.(ºC) | 90 | >100 | >120 | >60 | >90 | >150 |
| Chemical corrosion resistance | GOOD | GOOD | GOOD | GOOD | GOOD | GOOD |
| Compression strength(Mpa) | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 |
Products picture
--------------------------------------------------------------------------
ABOUT US
--------------------------------------------------------------------------
ARISONS is a professional Rubber&Construction manufacturer in China. The factory is located in Jiangsu, closed to Shanghai. After 15 years of development, it has a mature production system, a professional engineering team, a quality inspection department and a strong production line, providing a one-stop design scheme and product design for customers in many countries.
Our main products are rubber series products, bubble diffuser, water treatment equipment, aeration pipe, aeration disk, large pipe machine, driving, etc., we pay attention to quality, and will make different solutions according to different customers, provide the cheapest price, achieve the most perfect effect, has reached more partners for customers, look forward to cooperation with you!
Q1. What is your terms of packing?
A: Generally, we pack our goods in Blank Cartons. We privode carton LOGO print service after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before after receive the copy of B/L. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: We accept FOB,CIF,CNF,DDP,DDU,LC.etc
Q4. How about your delivery time?
A: Generally, it will take 7 to 10 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q6. What is your sample policy?
A: We can supply the sample for free, client only need to pay the delivery cost.